Author: mrzods13
68 Newport Cam break in
Ok a little frustrated at this point, car started up good was breaking the cam in, but the car was getting hot like 210 220, radiator was ok, but the…
Edelbrock 7186
When installing this intake it says to put Gasgacinch to the cylinder head flange and to the cylinder head side of the gasket. Do the gaskets go…
Radiator Hose inner coil
i bought galvanized steel 14 gauge wire from lowes and made the coils myself, anyone think these will be a problem, a little thicker than than old…
Radiator Hose inner coil
i bought galvanized steel 14 gauge wire from lowes and made the coils myself, anyone think these will be a problem, a little thicker than than old…
Cam Break-In
I have the new cam installed along with springs and lifters, everything is lubed up really good with the comp cams break in lube. My question is I…
Cam Break-In
I have the new cam installed along with springs and lifters, everything is lubed up really good with the comp cams break in lube. My question is I…
Valve cover gaskets
I have Mr gasket ultra seals I bought, but they don’t have the tabs on them, are the tabs really needed? Also wanted to know if anyone had any…