Author: mizzou580
Billet alternator pulley
Need advice on installing new billet pulley on alternator without damage. The old pulley came off fine. Some say heat up the pulley, use a press, c clamp. Any thoughts?
High volume oil pump
Looking for opinions on running the Melling M63HV oil pump on a lightly modified 65 383. I’m concerned that it might swamp the top end and won’t return fast enough. I’m assembling the engine now and…
wiring harness
Looking for a new or used engine compartment and front light wiring harness for a 65 Fury III. Any help would be appreciated.
Beehive valve springs
Can beehive valve springs be ran on 452 heads with out modifications?
Filler neck hose
I need a filler neck hose the connects the filler neck to the tube that goes into the tank on a 65 fury III. It’s about 3″ to 4″ long and is 2″ id on…
Filler neck hose
Thanks to help from this forum I found a fuel sender. Now I need a filler neck hose for the same 65 fury III. It is a hose about 3 or 4 inches long and 2″ id on one end and 1 3/4″ on the other. It’s…
fuel sending unit
Can anyone tell me if a fuel sending unit for a 66 fury III will work in a 65 fury III or any other models that will work. I’m having trouble finding one. Also I need to find the hose that connects…