Author: LAVA
torque conerter bolt problem
My 5/16 torque converter bolts keep backing out. I put lock washers on but now they are 1mm from the block. Should I take out the washer and use Loctite? Red or Blue?
Image:…
Knocking noise after new exhaust gaskets
I had felpro exhaust gaskets on my headers and they leaked bad. I put Remflex gaskets on and now it sounds like a random engine knock. It’s not constant, only every few seconds and comes and goes. Can a exhaust leak cause this? Or is this a random fa…
What temp for 340
I have a 185 thermostat in my 340. It stays right about there most of the time. Do I need to go up to a 195 or is 185 good enough for operating temp?
1940 Black Business Coupe 340
I bought this on a whim thinking I would be driving it within a year. I didn’t realize how much work I was getting into. It was a good way to use up spare time though. Working on it was better than…
kickdown cable making problem
I bought a 40 Plymouth project car with a 340 and 727 trans. Got the car driving and took it for a 1 mile ride. The trans worked fine. As I finished the car I put a Lokar kickdown cable on it. Here’s the problem; Without the cable the trans works …
JDM Speed HEI distributor
Has anyone gotten a JDM Speed HEI distributor from Amazon? Did you have success with it? Or is it just usual junk that causes problems?
Vacuum advance quastion
I have a 340. The manual says 2 1/2 degrees advance with the vacuum hose off. I have a new adjustable vacuum distributor and right now its showing about 36 degrees advance when I put the vacuum hose…