Author: flathead31coupe
727 lokar kickdown cable installation help needed.
After following the instructions and installing the cable and hooking everything up at the transmission, I noticed that with the Holly wide open, I’m about 1-in short. Is there something I’m missing for the Holly a bracket or something. I know the acce…
6. Cylinder duster is now a 340 ignition issues wants to start when you let up on the key
I’ve done some research on this. Still can’t find what was actually the problem when people had this issue. With a test light hooked up to the ballast resistor I turn the key on. I have light when I turn it to start. I have no light.. so I went to my …
Duster passenger side upper control arm mount repair thoughts needed.
I picked up another project I thought was better than it was not anyway. Passenger side upper control arm mount need repaired. The one closest to the front of the car. Can I adjust, replace or repair the bracket itself or do I need to change the whole …
535 supercharged first time start up?
After a rebuild new everything..was wandering if I should start it up to break the cam in …with or without the belt on the supercharger….
535 stroker build update…
So after getting this engine together I finally had time to fire it up. Started right up. Kept it about 18 to 2000 RPMs but was only able to do that for about 10 minutes or so. Temperature got up to operating temperature then I shut it off a flex plate…
Mickey Thompson 26×7.50×15…?
What would be a replacement tire for that other than the Mickey Thompson skinny tires for the front? Thanks