Author: Fireman Dan

I’ve got a brand new set (2024) still in the boxes, of Legendary black front and rear sheet covers for a 70 challenger. I also have new front seat buns. I can deliver to Carlisle.

I recently lost all of my interior in a garage fire from my 70 tribute project. I’m getting ready to go to Carlisle to see if I can replace my lost items. I don’t have a problem with new Repop stuff but I know there are several different companies that…

Now that AAR Fiberglass/stinger Fiberglass is out of business who makes a great quality hood for the TA? I found a place near Chicago but they actually have the front of the snorkel Fiberglassed down to the hood. What about the place in El Paso? Anybod…

Getting to assembly my 440 and thought I had a 402 pan. Turns out I have a 971 and 933. Will the 971 work on Ebody? I have a skid plate on my k frame.
TIA

I’ve usually gotten good advice from this sight, so here goes. Getting ready to assemble my 440. I’ve got a fair amount of building experience, just not with BBM. The OE heads were planed when they did valve job. I was thinking about roller rockers jus…

To speed up assembly I had a different axle housing powder coated. I removed the vent and hose block only to discover the hose was swaged to the block. (Found out that was 72-up) I went to order a stand alone L block but before doing so, looked at my 7…

Doing a brake upgrade on a 70 Challenger project car. Ended up buying a pair of slider brackets and bolts on ebay. I used a ‘78 Cordoba as the “source” vehicle for calipers, rotors, bearings, etc. I re-read the disco-tech article to be sure I had all t…