Author: demetri
driveline vibrations
For those that have not followed my thread, I have a 68 Imperial with some engine work on the 440, and a freshly rebuilt transmission. I finally got…
Fan Clutch
I was told that when the car is hot, and you turn it off, a way to check the status of the fan clutch is to spin it by hand. A properly working fan…
Speedometer gear
I had the 727 recently rebuilt. I have a suspicion that the speedometer and odometer are different from what they used to be. Do you guys know if…
440 coolant restrictors?
I am trying to build my own thermostat substitutes from fender washers. The ones I ordered have a thickness of 0.050-0.080. Does anybody have a…
kick down linkage adjustment
Hi all. Ever since I replaced the 630 cfm AVS with a 750 cfm AFB from Ederblock, I have issues with the kick down linkage (these were there, before…
Ederbrock Carter AFB 9755S
This 9755S is supposed to be 750 cfm. It is a square bore, based on the pictures. Is this going to work with my 440?
If not, any ideas of where…
Transmission front seal leak
The 68 Imperial is in the shop for engine work. The front seal of the transmission was found to be leaking, after repairing a rear leak. What is an…