Author: carguy300
Carpet
Can anyone recommend a good after market carpet manufacturer with good quality material for my 300? Ive been looking on internet, found 2-3, just dont know which one might be best for quality and cost.
Silicone?
When I pulled the water pump housing off the block the other day, there was quite a bit of silicone around the ports. When going back with the new, do I need silicone, if so what type or just gaskets. I did run a thin bead on the pump in the past but n…
Water pump housing.
I need to replace my water pump housing on my 300. Can you still get cast housings, all im seeing is aluminum. Any suggestions on alum vs cast? I pulled off my a/c compressor to get to t/ stat housing and found pump housing cracked.
Electric seat power.
Quick question, I pulled the electric seats out today and I noticed only one wire going to each one. Assuming that it would be power coming in, could I hook 12v to that switch and ground the frame and ck operation of motor on the work bench?
Floors.
I just pulled the dry rotted carpet out of my 300, this is what I found. Looks relay good and solid, couple of minor suface areas, nothing to worry about. The underneath has been undercoated and it is still solid, just peeling off in a couple spots. No…
Headlight doors.
Does anyone know if there is a way to manually open headlight doors on my 68 300?, i had a 69 about 10 years ago and I could with knob on bottom of motor. Cant seem to find away on my 68.