Author: Buldog9

OK for those following my tranny thread I was able to thread control rod between parking pawl and cup. Hooked it all back up and vehicle still does not engage in gear. Man this is frustrating! Any suggestions? I am going to give it one more try before taking in to be repaired by someone who knows…

If you have been following my thread you know the issues I have come up against. Here is the lateas with a few questions. I have installed the rooster comb/ball/spring combo along with the parking pawl. I cant seem to intsall as it sits. Do I loosen the spring on pawl, install trans, then guide…

So today I took it all back apart again. I found the parking pawl jammed past its little home. Will try to get reseated tomorrow and hopefully the…

Hey Guys noob Tim here. I am having an issue with my auto trans. The spring/ball combo for my rooster comb came out. I pulled the whole mess out yesterday.Reseated ball and spring.tested op OK. This is where I may have messed up. Attached to valve is a bar(linkage) back to torque converter.? I had…

So today I removed assebly and found spring and ball as previously discussed. Got it all back together, worked shifter through gears, happy to hear…

So today I had no work( Electrical Contractor), I thought it would be a good idea to replace that leaky shifter seal. Knowing the tool I bought was…

Ok guys heres another one. Anybody use the trans seal removal tool? Mine just came today so I set about removing linkage and happy as a clam that I…