Author: Aspen79

So Iam just about finish with this 360 combo. IAM just wondering will I get high 10’s lol
Stock stroke 360 ARP main studs
Reconditioned rods ARP studs
Windage tray
7 qt Mildon oil pan and pickup/ hi vol oil pump
.030 over forged piston 11.5;1 compression
Multi layer steel head gasket
Eddy proformer RPM head ( mild port, competition valve job)
Eddy RPM air gap intake (mild port, port matched, drilled and trap for fogger)
Cam is Hughesengines 242/246 @.050 lift 563/573 108 lsa)

I got my hands on a decent littler aspen RT a few years back. The car came with a 318. So I decided to step it up a little bit.

Motor
360 bored .030 over
Stock Rods resized (ARP bolts)
Steel crank (ARP main studs)
Edelbrock Performer RPM heads (ported) Attachment 1714759371 (http://www.forabodiesonly.com/mopar/attachment.php?attachmentid=1714759371)
Edelbrock RPM air gap intake (port matched)
Holley 750 CFM DP
MSD distributor

Attachment 7564 (http://www.forfmjbodiesonly.com/classicmopar/attachment.php?attachmentid=7564)
With this cam have a noticeable idle?
Camshaft…

In a 360 small block flat tappet hydraulic lifters will this cam have a noticeable idle?
Int lift .488 at the valve
ext lift .510 at the valve…