Author: 68HemiRR

This is a OEM 1970/71 Mopar 383ci/335hp point distributor. It has been
sitting on a shelf in my garage for many years, so it needs a good
cleanup, and is missing the wire to the coil, but there is no side play
in the shaft. $75.00. Local pickup, or buy…

This is a OEM 1970/71 Mopar 383ci/335hp point distributor. It has been
sitting on a shelf in my garage for many years, so it needs a good
cleanup, and is missing the wire to the coil, but there is no side play
in the shaft,but it might need to be gon…

This is a OEM Mopar 1969-71 E B & C Body Hood Pop Up Spring Part #2935375 for
all of the following models; PLYMOUTH; Barracuda; Cuda; 1970; 1971; all. Satellite,
Belvedere; Road Runner; GTX; 1971; all. Fury I; Fury II; Fury III; Sport Fury; VIP;
1…

This is a OEM Mopar 1969-71 E B & C Body Hood Pop Up Spring Part #2935375 for
all of the following models; PLYMOUTH; Barracuda; Cuda; 1970; 1971; all. Satellite,
Belvedere; Road Runner; GTX; 1971; all. Fury I; Fury II; Fury III; Sport Fury; VIP;
1…

OEM Mopar 1970’s Ignition Lock Cylinder w/key. According
to my research this is the correct part for the following
Mopars. 1972-76 A-body. 1972-74 B-body, 1972-74 E-Body.
It came out of a 1973 Charger with a tilt column It may be
correct for other yea…

This is a OEM Mopar 1965/66 Big Block 4V throttle return spring bracket.
It came off of a 1965 Plymouth 383hp police car. It is correct for
the 65/66 big block with a 4 barrel carb, but will work on any BB engine.
$20.00. Local pickup, or buyer pays s…

This is a Mopar throttle cable bracket adapter for use with a
high rise intake manifold. It raises the cable up about 1 3/4".
I used it many years ago with a Tarantula intake, and it put the
cable at the correct height, and angle. In the photos …