Author: 68charger440
Trick Flow 240 vs Stealth CNC heads
Trick Flow 240 vs Stealth CNC heads
I’m looking to replace my heads… which of the above would you go with. Also looking at the Crower hdp282 cam….
Whic way does gasket go on cartet fuel pump
I opened up a carter m4862 fuel pump to see if the diaphram was still good. It looked good so I put it back together and installed it, but it won’t…
Vapor lock driving me crazy
[TD]*Vapor lock driving me crazy (http://www.dodgecharger.com/forum/index.php/topic,119668.msg1484753.html#msg1484753)*
« *on:* *Today*…
Can I use originalDampner on neutral balanced motor
I built a 440 source 500″ stroker using my 1968 Charger. The rotating assembly was balanced by 440 source.
Can I use the original dampner from…
Are there fewer active users, or is it my imagination.
It seems to me that when I used to post on the old site that there were a lot more people active. Are we all getting old and dying off or is it just…
hard starting and voltage creeping at coil + side
I have been chasing ignition gremlins for awhile and need some help. When I turn the key to the run position without starting it, the voltage to the…
Sure grip sometimes only leaves rubber on one side
I have a 500″ stroker with 3:91 gears and street tires. When I mash the pedal (no power braking) it sometimes burns both tires an other times only…