Author: 392Stu

So how does a stock block 6.1 take to mods. Well, grantid that it’s a more developed engine stock than the 340’s I grew up on so you have a higher bar but it still responds well to mods. A tipical stock 6.1 will dyno 350 to 370 on this dyno, which is a little conservative if anything. These two pulls are a 08 6.1 charger SRT Max cam only with a cat back exhaust and cold air intake CMR tuned for the cam. The Other is an 06 SRT 300 C stock exhaust, Spartan Max cam, stock valve cnc ported heads,…

So how does a stock block 6.1 take to mods. Well, grantid that it’s a more developed engine stock than the 340’s I grew up on so you have a higher…

So you just bought that 6.1 hemi to put in your Cuda heres some news the 6.1 cams normally install at 120 degrees ICL which stinks for torque and the…

So you just bought that 6.1 hemi to put in your Cuda heres some news the 6.1 cams normally install at 120 degrees ICL which stinks for torque and the new hemis are real sensitive to ICL (cam installation centerlines) too retarded and it won’t pull the hat off your head. You take that combined with the 2.45 first gear ratio in a torque flight or 833 and you either need a big converter and/or deep gears to launch it good at the track. The rams have a 3.0 first and the LX’s a 3.5 to get them…

We been doing custom 3rd gen hemi cams since 05 and have tried alot of different grinds for all sorts of applications. There are numerious record…

We been doing custom 3rd gen hemi cams since 05 and have tried alot of different grinds for all sorts of applications. There are numerious record holding hemi rams and LX/LC platform cars running Inertia cams. We do alot of custom grinds for different applications but we also have quite a few stock grinds that we have names for. All our cams regardless of if they are stock or custom are 425 shipped. Unless we have the cam in stock it typically takes 2-3 weeks to get them made. I also…

Those of you who know Inertia will primarily associate us with the Dodge Rams and LX/LC platform community which is alot of what we do.

When we…