I'm going to reinstall a trans. cooler in 68 Barracuda. The previous owner had mounted the cooler on the front side of the radiator behind the front grill. The existing trans. lines were cut to connect the hoses to the cooler. The cut/connection was down around the base of the radiator. Anyways the hoses were zip tied to the bottom of the radiator panel than ran through some holes in the panel to cooler with some micky mouse metal straps for the mount.
Looks bad and wonder is there any kind of hose/mounting kit or do I just do my own fabrication or change the location.
The existing cooler is 11"x 7"
Chris
Nor Cal
Looks bad and wonder is there any kind of hose/mounting kit or do I just do my own fabrication or change the location.
The existing cooler is 11"x 7"
Chris
Nor Cal
