Author: Steve340

I did try to find the source/article I read but no luck finding it – so I thought I should ask here.
I did the ammeter bypass under the hood with a large wire from the alternator direct to the starter relay terminal.
I left all the original wires/ammet…

Do factory fitted Shaker hood cars have lighter hinge springs because of the large hole cut in the hood for the Shaker?
If so what are the differences.

I know these hoods look similar but are they actually interchangeable?
Will the 1969 scoops fit in a 68 hood?
Thanks Steve

HI all.
I have a cracked windscreen and must source a new one.
Is the front screen common between the Dodge and Plymouth B bodies.
In other words is a Belvedere/GTX screen the same part as a Coronet or Charger?
Thanks Steve

Hi all.
I read on another post about the desirability of the wide mouth pin style brake callipers.
Can anyone clue me in to what makes them desirable.

Do they work better?
Were only made for a short time?
Just curious.
Thanks Steve

Hi all. I was told by a guy that adding ZDDP additive to oil would not work as it separated out from the oil and lay in the bottom of the sump and did not mix with your oil.
However I went ahead anyway as I had a little plan and tons of Castrol oil I …

Hi.
Is the original finish on the trunk latch plate attached to the trunk lid painted or zinc?
I have researched in books and online and I see both.
Thanks Steve