Author: MrMoparCHP

One thing I noticed on the Jack Instruction sticker in the trunk (1969 Polara) is that it used Bolts and not Nuts, obviously bolts are not correct. I assume the error was discovered and corrected, I was just wondering if anyone else has noticed this.

…

I took the car out for a drive the other day, for the first 60 miles I stuck to the highway I got the typical thumbs up from many of the people on the road, nothing negative.

Headed up Highway 1 and into Cambria with the idea I might stop for lunch,…

With the recent talk about IBM cards and decoding them I thought I’d share what I have learned

This is an example of a card with punches representing Numbers and punches representing Letters

I do not know if there is an official label for the first …

As most probably know my car went through the Mecum Auctions in Glendale Arizona March 11, 2020
Desert Valley Auto Parts was the one who got the car and where I got the car in November 2020

I’m looking for anything specific to this particular auction …

I am the former owner of this car and have the original data plate. I checked with the person I sold it to (that built this car) and they do not have information.

Thanks,

Alan

In working on my car I noticed that the two vacuum lines need to be different size at each end.

The hoses I took off were 1/4" and fit one end properly. At the check valve and at the brake switch.

The other ends attach to the servo, one should b…

When I read about these motors I saw mention of the "thick" washer on the end of the shaft. When I took the motor apart I looked for it and thinking there might be a thin one as well, not sure why I thought that. I didn’t see one as I pulled …