Author: 1970GranCoupeCo

Greetings,

I thought I would do a little show and tell of my Holley Sniper Fuel injection system installation. I just got to the engine run and idle stage and I got to tell you that the engine really purrs at 850 RPM better than I have seen it before…

What is the proper solvent to remove the adhesive that adheres the "wood grain" decal to the instrument cluster metal bezel of an E-Body?

I peeled off the reproduction wood grain decal that I installed about 20 years ago and I am really stru…

Can someone please tell me how the factory AC evaporator drain connects to the engine side of the firewall rubber drain? Is there a plastic tube that shoves into the rubber drain tube?

I ask because I am installing a Custom Auto Air retrofit in a non…

Does anyone know the length of the 1970 Barracuda upper cruise control speedometer length.

Mine is 32 inches and that seems a bit short.

Greetings,

I thought I would do a little show and tell of my Holley Sniper Fuel injection system installation. I just got to the engine run and idle stage and I got to tell you that the engine really purrs at 850 RPM better than I have seen it before…

On the passenger side of my engine there is a metal bar that is connects a boss on the oil pan rail to the bolt on the Torqueflite bell and I noticed that the driver side has a large bolt and a boss on the oil pan rail but there is not the same metal c…

I finally am getting around to reinstalling my rocker moldings…this is the VERY LAST item for my complete restoration (until I take something a part again).

I pulled them out of long term storage and as I recall about 30 years ago I sand blasted the…