’75 duster rolling shell

The car was an original /6 4spd car but it's been gutted now. The hump has been cut out,(tranny cross member was cut but I can weld that back in) no interior(dash frame is there but no gauges or wiring), the front end is off the car, no wiring or tail lights. I did notice a little rust on the cowl around one of the drains.

Trunk floor/extensions/floorboards need to be replaced as well as the drivers 1/4 and most likely the pass 1/4.

I also have some tan interior parts. Also missing front window trim. Steering column is gone but I might have other columns from auto cars.

From what I can tell the rails are decent and thats why the car hasn't been cut up yet. The deck lid is off but present. Fuel tank Is present.

The glass was shot out of the car but I do have door windows, 1/4 windows and back glass. (windshield is present but has bullet holes in it)

I also have a '72 dart nose that could go with the car. I also have a spare pass door.
The car doesn't have any suspension under it but I have a sbp suspension /6 k member, I could put on to make it a roller and a sbp 7 1/4

The car would make a perfect candidate for a demon clone as all you would need is the tail panel and hood latch support bracket. (and fixing rust)

I also have rebuild able 318s and 904s and I have a a833 od. And I have a /6 or two

For a rolling shell I would like $200 no front end
Glass except windshield $120
Decent Dart front end I have been asking $500 but I will go $400 if bought with the car
Decent set of '75 duster fenders $100
replacement 1/4 for drivers side $75 might be too rusty though
Rebuildable 318 and 904 $120 or just 318 $100
rebuildable /6 and 904 $50
4 spd pedals, Z bar and a A833 steel case OD missing 2 shifter forks but otherwise nice $350 -no shifter or rods
automatic pedal $30
fold down rear seat set up- missing filler neck tube and I have brackets but I have to find them $120
Tan interior stuff $20
All prices are obo and I would trade for a similar '71 RR or '70 challenger

It is defiantly a project but the car is very savable.

These pics are when I first got the car and close to present but it is striped now

If the car does not go whole in 2 weeks I will cut the roof off, cowl and the frame rails and scrap what is left I need space for another car I just bought. I also have a clean title

Thanks -Ross-


Attached Images
         
Author: admin

’75 duster rolling shell

The car was an original /6 4spd car but it's been gutted now. The hump has been cut out,(tranny cross member was cut but I can weld that back in) no interior(dash frame is there but no gauges or wiring), the front end is off the car, no wiring or tail lights. I did notice a little rust on the cowl around one of the drains.

Trunk floor/extensions/floorboards need to be replaced as well as the drivers 1/4 and most likely the pass 1/4.

I also have some tan interior parts. Also missing front window trim. Steering column is gone but I might have other columns from auto cars.

From what I can tell the rails are decent and thats why the car hasn't been cut up yet. The deck lid is off but present. Fuel tank Is present.

The glass was shot out of the car but I do have door windows, 1/4 windows and back glass. (windshield is present but has bullet holes in it)

I also have a '72 dart nose that could go with the car. I also have a spare pass door.
The car doesn't have any suspension under it but I have a sbp suspension /6 k member, I could put on to make it a roller and a sbp 7 1/4

The car would make a perfect candidate for a demon clone as all you would need is the tail panel and hood latch support bracket. (and fixing rust)

I also have rebuild able 318s and 904s and I have a a833 od. And I have a /6 or two

For a rolling shell I would like $200 no front end
Glass except windshield $120
Decent Dart front end I have been asking $500 but I will go $400 if bought with the car
Decent set of '75 duster fenders $100
replacement 1/4 for drivers side $75 might be too rusty though
Rebuildable 318 and 904 $120 or just 318 $100
rebuildable /6 and 904 $50
4 spd pedals, Z bar and a A833 steel case OD missing 2 shifter forks but otherwise nice $350 -no shifter or rods
automatic pedal $30
fold down rear seat set up- missing filler neck tube and I have brackets but I have to find them $120
Tan interior stuff $20
All prices are obo and I would trade for a similar '71 RR or '70 challenger

It is defiantly a project but the car is very savable.

These pics are when I first got the car and close to present but it is striped now

If the car does not go whole in 2 weeks I will cut the roof off, cowl and the frame rails and scrap what is left I need space for another car I just bought. I also have a clean title

Thanks -Ross-


Attached Images
         
Author: admin